24V 10A In-Vehicle DC Power Supply
The REDARC 24V 10A DC Power Supply (DPS2410) provides regulated power for a wide input voltage range (9 to 32 volts) for a number of load requirements.
The REDARC 24V 10A DC Power Supply (DPS2410) provides regulated power for a wide input voltage range (9 to 32 volts) for a number of load requirements, such as radios, lamps, computers, refrigerators, pumps, and TVs, all from a 24V automotive power system.
Robust and flexible installation option
The power supply protects against surges, spikes, reverse polarity and incorrect connections, while providing improved efficiency and functionality. It is fully encapsulated by REDARC’s silicone elastomer and can be mounted externally on the vehicle and used in marine applications, if necessary. Plus, the fan free model means less noise to prevent interference when powering hi-tech radio systems.
For help in choosing the best dual battery setup for your needs use the free REDARC dual battery selector.
California residents: see Proposition 65 information
|Output Current Rating (Cont.)||10A|
|Input Fuse Rating||40A|
|Output Fuse Rating||40A|
Don't lose your volts
Increased demands are placed on our vehicles with every passing mile. Many devices related to these demands - communications equipment, computers, measurement devices and precise actuators, are quite sensitive when it comes to the power they receive from the source.
However, power is not always clean and stable. At best it can cause poor performance or at worst cause damage to these devices. In a typical heavy vehicle setup there are a few major causes of electrical noise or instability. This includes:
- Vehicle charging and starting systems requiring the correct voltage to be applied
- Loads like compressor fridges, radios and water pumps causing short voltage drop
- High current consumers like engine starter motors or electric pumps causing electrical noise
- The vehicle alternator causing electrical noise, affecting sensitive devices
This can cause lights to be more dull or bright, inconsistent radio strength, fridge efficiency and performance dropping with voltage, inaccurate measurements being taken, and actuator speed and strength can suffer. Electrical noise can also cause excessive heat and interference resulting in damage to electronic components or internal batteries and poor performance during operation particularly on radio and measurement equipment.
The solution is a REDARC DC Power Supply, which can deal with a diverse range of noise and voltage levels. Whether it is a 12 or 24 volt vehicle running a 12 or a 24 volt appliance, requiring a clean and stable specific power supply, the DPS range will provide this power in even the harshest of environments.
With a range of power ratings you can make sure your vehicles safety, communications, and critical equipment always has the power to function effectively no matter how great the distance.